Garment Printer – Four Properties to Look For When Deciding to Buy a Garment Printer.

Do you wish to include a photo to your quilt that looked more like part of the fabric than an iron-on decal?

Before, we relied on photo transfer paper to iron our photo onto our quilt block. Have you heard about direct-to-garment printing? It’s a great new method of getting your chosen photo away from your scrapbook and to your quilt block.

Direct-to-garment (DTG) printing is a form of digital printing. Having a value of about $20,000, it’s not practical to run out and buy your very own DTG printer. The standard price for latte printer is $8 to $10.

This technique is a bit more pricey in comparison to the traditional photo transfer method. That’s partially since the technology is so new. Should you do choose to consider using a DTG photo in your memory quilt block, there are some factors to consider when deciding on the printer who can do the do the job:

1. Be sure there are no chemicals found it necessary to pre-treat your fabric first. Some DTG printers create a photo that is certainly similar to screen printing. You don’t want that appear to be or feel on your own quilt. The ink will probably be hard in addition to the fabric and may eventually (sometimes much sooner than later) are going to crack and wear with washings. Ask your prospective printer to see a sample of something they’ve printed. Provided you can feel the ink is raised above the surface at all in any way, it’s probably a sublimation type process which requires chemicals to pre-treat the fabric.

2. Use a kind of digital DTG printing made available from the Brother GT 541. You can find no chemicals required to pre-treat the fabric. The inks bond with all the natural fibers and so are heat cured setting the graphic. The inks are water based, that helps leave a soft yet crisp image on your own fabric.

There are many downfalls to using uv printer on the quilt blocks. One pitfall is color limitations. Since DTG printing is really a form an electronic printing, there is no white ink. White is the lack of color. Consequently you can not print an image on navy blue or black fabric.

Digital garment or fabric printing can be a CMYK format – cyan, magenta, yellow, and black. You may mix those colors to have a full spectrum of accurate colors – hardly white. There are actually DTG printers that print white ink, but most of those require chemical pre-therapy for the material and can leave you with that thick surface print.

You have to use a light colored or neutral fabric and it should be cotton or possibly a cotton blend. The material must have the ability to withstand 350 degrees for approximately thirty seconds. If you are not 09dexypky with 100 percent cotton or perhaps a 50/50 blend, ask your printer in the event the fabric works.

Measurements of your print could be a limitation. Most DTG printers possess a printing field approximately 14 inches x 16 inches. For almost all quilters, that size range won’t become a problem.

And talking about printing fields, here’s a hint. Most direct to garment printer charge to get a 14×16 surface. If your blocks will permit 2 or 3 photos to match within that range, you can get every one of them printed for the buying price of one. Consult with the printer to find out if it’s possible with your particular project.

Like other technological advances, the price tag on digital garment (or fabric) printing will probably decrease over time. Maybe it would also be seen on smaller printers for home and private use. Until then, try to locate a DTG printer for your forthcoming photo quilt project. The outcomes will look like custom fabric, which is a great touch to your one of a kind quilt!